1, you must make sure that the Banner Stands printer has a solid working platform, do not place any items on the top of the printer. When printing, the printer must close the front cover, to prevent dust from entering the tank or other hard things hindering the movement of printers. Ban live plug the Banner Stand printer cable, which can damage the? printer port and the PC’s parallel printer port, in serious cases, damage to the PC Board. If the printed output is not very clear, available Banner Stands printer automatic cleaning feature cleaning nozzle, but consumes a small amount of ink. If continuous cleaning after a few prints are still not satisfied, has run out of ink, ink cartridge needs to be replaced.

2, ensure that the surrounding environment clean. Too many work environments with dust, easily lead to poor lubrication guide shaft, make mobile is blocked on the print head during printing, print position caused by inaccurate or impact mechanical frame cause damage and panic. When the print head is not returned to the original location when you power on again, first will make the print head back to the original location of the Retractable Banner Stand printer, then head cleaning operation, so will create unnecessary waste of ink. Solution to this problem is often on the shaft of the dust off the lubrication and guide axis (liquidity better selection of lubricating oil, sewing machine oil).

3 when you finish, cartridge is not used, it is best not to remove, so as to avoid measurement error ink waste ink or Banner Stands printer.

4, shut down, head back to the initial position (under Banner Stands printer in pause state, the print head automatically return to original position). Stylus Color, Stylus Pro XL, MJ-1500K, printer in shut down automatically before the print head moves to the initial position, such as MJ-800K, Stylus-1000, Stylus Color II, must be confirmed before the shutdown in a suspended state (that is, suspended or Pause light lights) to shutdown. Doing so is avoiding head cleaning operation again next time you power on the Banner Stands printer waste ink, and second, because the nozzle in the initial position can be sealed by the protective cover, clogging the nozzle easily.

5, part of the Banner Stands printer print head at the time of the initial position of mechanical locks, if hand move the nozzle will not be able to make from the initial position. Note do not force moves the print head, or the printer will cause mechanical damage. Such as MJ-1500K, Stylus Color Banner Stand printer, the print head is in the locked state when the initial position.

6, changed the ink cartridge when it is important to follow the steps in the operation manual, special note to do this in a powered state. Because after replacing the ink cartridge, printer ink-filled the ink delivery system, this process will not work in a shutdown state, also cannot be detected on a reinstall of the Banner Stands printer ink cartridges. In addition, some Banner Stands printer ink capacity measurement is carried out using electronic counters inside the Banner Stands printer to (especially on the color of ink usage statistics), when the counter reaches a certain value, judge ink running out of the printer. In the ink cartridge replacement procedure, the printer will reset the electronics counter inside it, so as to verify that installed a new ink cartridge.

7, the ink cartridge in the long term should be placed when not in use to avoid direct sunlight at room temperature. Because ink evaporation in this environment quickly, easily causing nozzle clogging. Also in cold, damp environment, circuits and ink print head problem.

8, the cartridge needs regular calibration: printers using the experience of the user is known, reload the cartridge or the Banner Stands printer for the new cartridge to printer calibration, to improving the accuracy of print and the print quality. But the printer was not noted in the course of this, so to remind everyone: for the average home user, Banner Stand printer after 1-2 months of normal use will be timely correction of the cartridge to ensure that printers normally print quality.

Ink tips
Correct use and maintenance of reduced consumption of ink-jet printing inks. Black ink too fast-depleting may be caused by incorrect operation of the following:
Not to press the power (Power) key to close the printer.
Often close printer unplug the power plug from the socket.
When the printer is printing off the printer.
Maintenance can extend the life of the cartridge below:
If you need to transport your Banner Stands printer, please leave the cartridge in the printer and tape fixed. When you want to stop using the Banner Stand printer for a long time, and when the ink cartridges have left most, please save the ink cartridges in the stage box. Head cleaning consumes ink, so head cleaning only in poor print quality.